5 Best Drawer Slide Jig for Quick Installation

A drawer slide jig is a lifesaving tool for every woodworker. However, installing a drawer slide can be difficult without an assistant, and some people don’t have one available to help them install it with ease. An excellent alternative to getting assistance is investing in the best quality set of slide jigs which will make installation much easier- even if you do not have someone else around who could lend their hand! They will hold the slides in place, so all you need are screws!

If you’re looking for a drawer slide jig that’s easy to use, adjustable, and portable, look no further because I have the perfect list of the 5 best drawer slide jigs! After doing some research with my team on different brands, we chose these five. They are all so good, but it boils down to which one is best suited for your needs in both price range and features.

What is a Drawer Slide Jig?

A drawer slide jig is a tool that allows you to add or remove the slides from your drawers and other cabinet pieces. They are generally made of plastic with different types of slide holding mechanisms. The slide jigs are available in various sizes and designs to best suit your needs. Drawer slides typically come with installation instructions that should be followed closely for best results!

Some drawer slide jig requires face clamps for holding the jigs in place, and some these jigs have handles for holding it by one hand. Then, you just need to measure the distance where the slide will be attached and place the sliding jig with the slide. You don’t need to hold the slide in your hand; that will ease your work.

List of 5 Best Drawer Slide Jigs

Slide jigs are available at the marketplace with many different designs. Every design has its own characteristics that make it perfect for a certain task, so choosing one is always tricky! But never fear – this list of the 5 best drawer slide jigs will help you find your way to the right tool for whatever project needs doing.

My Choice

If you don’t have much time in your hands to spend reading the whole article, then here is a short one for you. I tried out some of these drawer slide jigs and found ASCENDAS universal drawer slide jig most suitable for me. It has an indexing rod that can be used repeatedly and powerful magnets that hold slides with this great piece of equipment! Both slides and drawers are installed quickly using their excellent product, but my job or working procedure might not match yours, so please read on if you are interested in choosing something more appropriate.

1. Kreg Drawer Slide Jig and Kreg Face Clamps

The Kreg drawer slide jig is the most straightforward design among all types of woodworking tools. This simplicity allows this to perform some jobs that are not possible with other types of slide jigs. However, you will need a face clamp for it to work correctly. To see what features come in this package, let’s take a closer look at its specs!

As I told you before, this simple design slide jig can perform a feature that is impossible with another slide jig. This slide jig can install both drawers and slides. With only 1 clamp for a slide, 2 clamps are needed when installing a drawer. Luckily this package comes with everything you need to succeed at your next project. 2 lightweight, long-lasting face clamps that adjust on the go, so they fit any size of wood or metal board, as well as 2 slider jigs which help make installation easy even on difficult angles where other tools fail.

Jigs are very straight and accurate that you can even use them as a roller if you want. They have built-in indexing tabs, so they’re easy to set up every time. You don’t need to measure or mark each time, and the jig has an uneven surface inside, making for better grip when clamping down on your workpiece(s). The Kreg KHI-SLIDE drawer jig is perfect in many different applications – cabinets, cases, etcetera! And it’s also reversible to mount slides (or any other hardware) to cabinet and drawer boxes alike too!

No more slippage or slipping! This package includes 2 best drawer slide jigs, and it also comes with a couple of solid face clamps. You’ll love the long-lasting shape that these clamps have—they can hold any sliding jig in place while you work on your project for hours without fear of mishaps. In addition, these clamps are strong enough to keep even heavy drawers perfectly still during construction projects, so there’s no need to worry about anything going wrong again; they’ll grip tight right away until the end when you’re done working.

These clamps are perfect for the handyman on a budget. They’re capable of clamping materials up to 23/4″ thick, which is more than enough for most projects and carpentry work. Even better? These face clamps have an extra-large grip that distributes your force evenly over their large surface area, so you won’t deform any surfaces while tightening down with these sturdy tools! The 3″ reach can also help someone working in tight spaces like installing drawer rails correctly or when reaching into tough nooks and crannies during car repairs where other larger alternatives aren’t as easily accessible.

Pros

• These simple design jigs are easy to use.
• This package contains 2 jigs and 2 clamps.
• Kreg drawer slide Jigs have built-in indexing tabs.
• These jigs can be used repeatedly without measuring and marking.
• Automatic face clamps have an extra-large face.
• Drawers can also be installed with this jig and clamp set.

Cons

• This design of the jig does not contain an indexing rod.

Know More: How To Use Kreg Drawer Slide Jig for Installing Slides and Drawers

2. Rockler Universal Drawer Slide Jig

Rockler’s universal drawer slide jig is second on the list of five best drawer slides. It has a unique design that allows it to perform jobs without any hassle and includes an easy grip for holding this gear in place, so you don’t need to use face clamps. Of course, if you’re good with one hand getting things done, then a clamp isn’t necessary – but if not (or when using screws), these can be purchased separately at your discretion.

One of the best features about this Rockler Universal Slide jig is that it has a locking wedge. The locking wedge makes sure there’s no risk for slippage with sliding action, which can be problematic in some other slide designs like Kerg jigs. With this design, you need to insert and lock the head of your slides inside the keyhole on one side, then push them firmly against something solid. It also works for center-mount slides, and ball-bearing type drawer slides like epoxy coated ones, making installation an easy process since all one needs to insert their head inside then use a key on top of them firmly until they snap into place.

This design is so perfect that you can screw it into the jig. It has some access holes for screwing in a slide to your cabinet wall, and an entire body made of plastic means it’s lightweight with long-lasting durability! You’ll need this product if you’re looking for easy installation or mobility. However, you cannot use this if what you are installing is a drawer.

The indexing rod is an excellent feature because it will make your repeated use perfect. Once you initially measure the distance, just fix it with a key and never have to worry about measuring again! Also, the height of this jig can be adjusted up to 1 3/4 inches, so no matter what size drawer or door you’re installing slides on, there’s plenty of room for all sizes.

Pros

• Rockler universal drawer jig has a handle grip for holding the slide in position.
• Rockler universal drawer jig is made of plastic. It is lightweight to hold in one hand.
• Rockler universal drawer jig has an indexing rod for repeating use.
• Rockler universal drawer jig has a locking wedge for holding the slide.
• Rockler universal drawer jig can be used with a clamp or without a clamp.

Cons

• You can’t install drawers with this jig.
• Rockler universal drawer jig contains only one jig, and the clamp is not provided with this.

3. ASCENDAS Universal Drawer Slide Jig

The ASCENDAS Universal Drawer Slide is a bit mixed with both Kreg and Rockler drawer slide designs. It includes features from both designs but also excludes some features as well. However, a woodworker who does not want to use clamps (or has them in place) will find this product perfect for any project! Let’s see what additional feature ASCENDA offers:

This jig is a lightweight and compact option for the beginner carpenter who wants to save time on measuring. It has an adjustable handle grip that will fit any hand size, so you can be sure it won’t slip during use. The body of this tool also features some open space which keeps it light enough (1.14 pounds) to hold with one arm while working your way through intricate details without losing control or precision due to added weight.

The tool has a powerful magnet at the top of it that can be used to hold metal slides. They make the process easier and more convenient because they will never weaken over time as other materials do. This jig contains a 38cm indexing rod for repeated use. You can measure the distance from up or bottom through this rod and fixed it with a key. After setting, you don’t need to measure any other side for repeating the slide.

Like the Kreg drawer jig, you can also use it for installing the drawer. This tool works with ball-bearing, epoxy-coated, and undermount slides to accurately position any cabinet slide in just minutes. The weighty design provides stability as it guides the drill bit into place without flexing during use.

Pros

• ASCENDAS universal drawer jig has a beautiful and comfortable handle grip, so no need for the clamp.
• ASCENDAS universal drawer jig is an ultra-lightweight drawer jig for one hand using.
• ASCENDAS universal drawer jig contains some magnets for holding the slide.
• ASCENDAS universal drawer jig provides an indexing rod(38cm) for repeating use.
• ASCENDAS universal drawer jig can be used for installing a drawer.

Cons

• Contains only one drawer jig.

Know More: 6 Best Panel Camps Review in 2022

4. Rockler Undermount Drawer Slide Jig

This drawer jig is specially designed to install Blum tandem slides into your cabinets! It’s a small slide jig that fits in the concealed drawer slide of your cabinet. The intelligent design has an easy-to-grip handle, which can be used for pressing or clamping onto the sidewall of a cabinet to hold it securely during installation and adjustment. You’ll never have any trouble with slipping again because this Rockler tool will do all the work for you!

One of the unique features of this jig is that it can hold both sides of a drawer slide. This feature makes for easy installation and removal, allowing you to do more with your time than spend hours trying to install something without any help or guidance. In addition, the powerful rare earth magnets ensure that they never get weak over time and will always be as strong as when first purchased!

Installing a slide with this jig is quick and easy. First, you need to attach your choice slide or shelf hardware to one side of the jig in any orientation that fits best on either the left or right cabinet wall. Then place it into position by pressing it against the adjacent cabinet wall until all screws are aligned for installation. Ensure there’s a 2mm setback from each edge, so no visible seam will show up later when decorating (this part can be tricky). Finally, screw everything down tight!

This jig is great for a variety of purposes and offers many features that are useful to DIYers. But it does not have any indexing rod or anything for repeating the slide installation. So, if you want to repeat structures, then you’ll need to do them manually.

Pros

• Rockler Undermount drawer slide jig is a small, lightweight jig(1.02 pounds).
• It has a comfortable handle for better grip.
• Rockler Undermount drawer slide jig consists of 6 rare earth magnets for holding the slide.
• You can use it with a clamp or without a clamp.

Cons

• The Rockler Undermount drawer slide does not have any indexing rod.

5. Kreg Drawer Slide Jig Set

If you are a regular woodworker and want to buy some essential tools at the best price, this package is for you. This package includes 6 of the most important tools in any woodworking kit, plus more! It contains 2 Kreg drawer slide jigs, 1 cabinet hardware jig, 1 concealed hinge toolkit with all accessories needed for installation. 2 face clamps measuring 2 inches wide each that offer easy clamping on both long or short pieces, respectively. It is perfect when working alone. Plus, you’ll save 30$ if they were bought separately.

The Kreg Jig is a simple, lightweight multi-functional drawer slide jig that can be used to install the slides and drawers. It comes with built-in indexing tabs for installing them quickly and easily on both sides at once, so you don’t have to worry about lining up each side individually. With two included clamps, it will also secure your work firmly as needed while building!

These 2-inch face clamps here are a little bit small but powerful. They can hold the jigs tightly, and sometimes size may cause some problems for you-like if they’re too big or something like that. But these classic face clamps serve their purpose well; in fact, they’re really good at serving various purposes!

The concealed hinge jig is a wonderful and worthy tool. It has two keys for adjusting the size of your hidden hinges, so you can use any size that suits your needs and set them to adjust up to half an inch deep. This means you can use any sized hidden hinge, from small to large, with this setup as it’s able to adjust cut depth- cutting in at half-inch or less deep! There are also two small access holes that make drilling easy even if there isn’t an easily found center point on your material. It contains markings inside the jig, so finding one’s exact spot for drilling doesn’t have to be tricky.

Cabinet hardware jigs are, by far, the most prevalent model of cabinet hardware installation device on the market. But what makes this one so special? Well, let’s have a look at its features: it has two movable edge guides and measuring scales for making the position of knobs precisely. Another build-in scale for measuring distance while also featuring an adjustable drill guide to ensure straight holes without help of any self centering drill bit! This package comes with all the necessary parts (screws). You need to install your new knob onto anything from cabinets, doors, windows, etc.

Pros

• This package has 6 must-needed tools for woodworking. They are 2 Kreg drawer slide jigs, 1 cabinet hardware jig, 1 concealed hinge jig, and two 2-inch face clamps.
• Drawer slide jigs are very simple and can be used for installing drawers also.
• Face clamps are small but powerful enough.
• Cabinet hardware jigs are usable for serving various purposes and can be used to install knobs and pulls.
• Concealed hinge jig is helpful for various sizes of concealed hinges.

Cons

• The size of the face clamps is small.

Buying guide

It’s an important part for the new woodworker and those who rarely use drawer slides. They have to consider a lot of factors before buying this must-needed tool. Now I’ll talk about some of them as well so that you don’t make any mistakes in your purchase decision process.

Your Toolbox

If you have a face clamp or any other type of clamp in your toolbox, don’t bother to repurchase it. Instead, you can find one that doesn’t contain the same brand and style as what’s in your current kit. In that case, you can go for ASCENDAS or Rockler drawer slide jig. But if there are no face clamps in your toolbox already- just get the Kreg drawer slides package.

Price

Many factors can go into a decision to purchase any product, but the price is usually one of the most important. Sometimes you may want to buy a tool, which isn’t in your budget, so it’s best not to buy an expensive option for something cheaper will suffice. That’s why I offer jigs at all ranges, including low-cost ones! So, fix your range and choose from my selection of drawer slide jigs available with prices that fit every type of customer.

Suitable Work

Before that, all the selected products had different designs, and they could do the word differently. For example, Kreg and ASCENDAS drawer slide jigs are able to install a drawer where other products can’t perform this task so well. But Rockler’s undermount drawers’ jig is not as suitable for repeated use because it does not have any indexing rod. So you have to consider your workload before buying which one will get more priority from you in terms of its quality or durability.

How to Use a Drawer Slide Jig?

A drawer slide jig is easy to use, but you need to follow the installation instructions carefully for best results.

First, measure where you want your slides attached–typically at 16″ from each side! Once those distances are measured out and marked with a pencil (or something like chalk), clamp down the plastic jig on top of them using either face clamps or by holding it in both hands. Now all you have to do is attach an anchor bolt into one end hole of the drawers’ corner bracket with a screwdriver or drill/driver attachment set. 

Pull back on this edge and insert one end of your slide into the other hole in the bracket. Push it against tight to ensure a secure attachment, and then insert bolt at the opposite end of the slide again with screwdriver or drill/drive attachment set. Now all you have to do is attach your hardware, like handles! After completing one side, you’ll repeat the same process for the other side.

Some drawer slide jigs can be used for installing drawer slides and also for installing drawers. After installing both drawer slides, you need to attach both jigs at a time. Then it will help you with easy drawer installation.

Tips and Tricks for Installing Drawer Slide

• Make sure to follow installation instructions closely for best results. 
• The drawer slide jig should be clamped down using either face clamps or hands on both sides of where you want your drawers attached. This ensures a secure attachment and prevents slipping from happening as well. If this is not done, then there may be problems with alignment and stability when attaching hardware like handles or other parts of the project. Make sure everything lines up before moving onto the next side! And don’t forget to use anchors bolts–they are important for keeping things together tightly!” 

How to Make a Drawer Slide Jig?

This should be relatively easy to make if you have the right tools. First, measure your drawer slides and cut a piece of plywood that is about 12″ by 24″. Then drill another hole in each side so it can attach with screws for stability and alignment purposes. Now take an old credit card or other thin cardboard-like material (you won’t need much–maybe just one sheet) and glue this on top of where the holes are drilled out. This will help create enough friction when installing hardware onto your drawers! You may not want to do this for large projects because it might get too messy.” 

Is Kreg drawer slide jig work?

The Kreg drawer slide jig is a great tool that makes it easy to install drawer slides. It is very easy to use and makes the process of installing drawer slides much quicker and easier. The jig is very well made and is very durable. It is also very easy to adjust, and you can use it on any size drawer. Overall, the Kreg drawer slide jig is a great tool that is well worth the money.

What is The Easiest Way to Install Drawer Slides?

The easiest way to install drawer slides is to use a jig. A jig is a tool that helps you to drill the holes for the drawer slides in the correct position. You can buy a jig, or you can make one yourself.

First, you need to measure the width of the drawer and the thickness of the drawer slides. Then, you need to mark the position of the holes on the drawer. Using a jig, drill the holes for the drawer slides. Next, install the drawer slides into the holes. Make sure that the slides are level and flush with the drawer.

Then, install the drawer into the cabinet. Make sure that the drawer is level and that the slides are properly aligned. If you want to install drawer slides without using a jig, you can use a template. First, you need to find a template that matches the size of the drawer slides.

Then, you need to mark the position of the holes on the drawer. Next, drill the holes for the drawer slides. Finally, install the drawer slides into the holes. Make sure that the slides are level and flush with the drawer. Then, install the drawer into the cabinet. Make sure that the drawer is level and that the slides are properly aligned.

Some Common Question About Drawer Slide Jig

1. How Does a Drawer Slide Jig Work?

The drawer slide jig holds the drawer slide perfectly with the cabinet wall so it can’t move. If A drawer slide jig is an essential tool for installing new cabinet hardware. It secures the slides against a wall, so it’s impossible to move them by accident while you’re working alone. So here’s an idea for saving time when you’re working with a big, heavy cabinet. First, prepare the slide as in step one and ensure it is secured to the wall using jigs or clamps (depending on what type of work surface your cabinets are sitting on). Next, use both hands to screw them into place by holding onto the handles at either end.

2. Can Drawer Slides be Shorter Than Drawer?

Basic drawer slides can be shorter than a full-sized kitchen cabinet. However, before you cut your slide to size, make sure it will fit perfectly when installed on the back of your furniture with space at both ends for stability and security.

3. Can You Cut Drawer Slides?

Yes, you can cut any drawer slide with a hacksaw as per your needing size.

4. How Much Weight Can a Drawer Slide Hold?

It depends on which clamp you are using. But maximum drawer slide can hold enough pressure to hold a drawer.

5. Is Kreg drawer slide jig work?

The Kreg drawer slide jig is a great tool that makes it easy to install drawer slides. It is very easy to use and makes the process of installing drawer slides much quicker and easier. The jig is very well made and is very durable. It is also very easy to adjust, and you can use it on any size drawer. Overall, the Kreg drawer slide jig is a great tool that is well worth the money.

6. How Do You Install Drawer Slides in Parallel?

In order to install drawer slides in parallel, you will need to use a jig. A jig is simply a template that you can use to ensure that the slides are installed in the correct position.

Once you have your jig, you will need to mark out the positions of the drawer slides on the drawer itself. It is important to make sure that the slides are installed in the same position on each side of the drawer so that they will slide smoothly.

Once the positions are marked, you can then begin to install the drawer slides. It is important to make sure that you use the correct screws for the installation. Once the drawer slides are installed, you can then test them to make sure that they are sliding smoothly. If they are not, then you may need to adjust the position of the screws or the drawer slides themselves.

Conclusion

If you are a cabinet maker, then the drawer slide jig is essential for your work. This article has discussed some of the best drawer slide jig to use in furniture making and other woodworking projects. We hope that our list will help you find just what you need so that your next project can be successful.

Related Posts

1. How To Use Kreg Drawer Slide Jig for Installing Slides and Drawers
2. Self Closing Vs Soft Closing Drawer Slides
3. 6 Best Card Scraper for Producing Smooth Wood Surfaces
4. 6 Best Panel Clamps Review in 2022
5. 5 Best Plug Cutters for Creating Smooth Plug in 2022
6. 7 Best Cabinet Face Frame Clamps for Easy Frame Installation