Kreg Drawer Slide Jig is the perfect way to install a drawer slide in any drawer. This jig holds pieces together while you drill holes and then screws them in place. You can use it for drawers, cabinets, or even furniture. It works well on both softwoods and hardwoods.
The most important thing is that this drawer slide jig can be used to install both the slides and the drawers. Now I will discuss how to use kreg drawer slide jig for installing slides and drawer in this article.
Kreg Drawer Slide Jig
Kreg drawer slide jig is the best product I have ever used to install drawer slides. It works perfectly, and it is really easy to use. I can say that this jig is the best because it has changed my life. Before using this jig, I was having a hard time installing drawer slides.
It seems to me that the biggest benefit of using this jig is that it enables you to install both drawer slides and drawers. You’ll need 1 jig and a face clamp to install a single drawer slide with the Kreg jig and clamp. If you want to use this to install the drawers, you will require two jigs and two face clamps at a time.
Kreg drawer slide jig doesn’t have any predefined indexing rods, so you have to measure the height of the spot manually and mark it with pencils. So you need to have a level and a tape measure and a screwdriver or a power drill to screw the screws.
Know More: Self Closing Vs Soft Closing Drawer Slides
How To Use Kreg Drawer Slide Jig for Installing Slides
Step 1: Mark the location of your drawer slides
Prior to beginning your project, you should accurately measure the position of the drawer slide. First, find where your drawer will go by using a tape measure or any other scale. Then draw a parallel line for positioning the jig and slide at this certain point. It’s crucial that the measurement is accurate and the marked line is straight to ensure a well-fitting drawer.
Step 2: Place the jig
When you’ve found out the positioning of the slides, the next task is to place the slide jig parallel to the starting point marked straight line. Keep the even surfaces of the drawer slide jig on the inside.
Step 3: Clamp the jig
The next step is to clamp the Kreg drawer slide jig with a strong-faced clamp. If the clamp is powerful, then you can simply put it aside and use both hands to perform more tasks. Make sure you have appropriately positioned the jig on the line.
Step 4: Place the slide
If your Kreg slide jig is set up and clamped correctly, you can set up the next Work to place the drawer slider. Put it above the slide jig parallel to the jig.
Step 5: Screw the screws
Now, screw the screws with a screwdriver or a power drill. Make sure to do not move the jig or slide when you are screwing the screws.
If the slide is securely attached to the wall, remove the clamps and jigs and use them for attaching the other slides to the wall.
How To Use Kreg Drawer Slide Jig for Installing Drawers
Step 1: Place the jigs
This process is also similar to the previous one. First, set the slide jig across the installed slide but outside of the cabinet frame. Place two slide jigs on both sides of the cabinet.
Step 1: Clamp the jigs
Afterward, you’ll need to use two face clamps to clamp the drawer slide jig to attach it. You ought to keep in mind that you can use a normal face clamp for the drawer slide during the installation process but should be using a strong clamp for attaching the drawer. The clamp must carry the weight of the drawer.
Step 1: Place the drawer
Following clamping the slide jig, the last step is to place the drawer in position and Screw all the screws in position to attach the drawer to the slides. Then push the drawer softly, if all the positions are prepared correctly, the drawer will slide in effortlessly.
Afterward, the clamps and jigs can now be put to use for installing another drawer.
Tips and Tricks
- You can adjust the height of the slide by adjusting the height of the sliding jig.
- If you are using a template, you can use this to mark where you want to hang each drawer. You can also draw double lines on the template and use it as a guide when placing each drawer.
- Buy at least 2 Kreg drawer slide jigs and 2 strong face clamps.
- Use a drill to make clean holes for the screws that you are using to hang each drawer.
- Make sure that your face clamps are strong enough to hold the weight of the drawer.
Frequently Asked Questions are Answered
1. How Do I Use The Kreg Drawer Slide Jig?
The Kreg Drawer Slide Jig is very easy to use. Simply clamp the jig to your drawer box, drill the pilot holes, and attach the drawer slides. That’s it!
2. What Size Drawer Boxes Will The Kreg Drawer Slide Jig Work With?
The Kreg Drawer Slide Jig will work with any size drawer box.
3. How Many Drawers Slides Jig Do I Need To Install Drawer Slides?
You should buy at least 2 Kreg drawer slide jigs for an easy installation process.
You’ll find others companies’ drawer slide jigs with more features, but the Kreg jig is the simplest and most user-friendly to use at home. It’s reported to be the best value drawer slide jig for the money. Follow the instructions to install drawer slides correctly with the Kreg drawer slide jig. Ask me any questions you have. Thank you.
- 5 Best Drawer Slide Jig for Quick Installation
- Self Closing Vs Soft Closing Drawer Slides
- 6 Best Card Scraper for Producing Smooth Wood Surfaces
- 5 Best Clamping Squares for DIYers and Carpenters
- 6 Best Panel Clamps Review in 2022
- 5 Best Plug Cutters for Creating Smooth Plug in 2022
- 10 Best Wood for Cabinet Face Frames
- 7 Best Cabinet Face Frame Clamps for Easy Frame Installation