Best Edge Banding Trimmer and Veneer Edge Trimmer in 2023

The best edge banding trimmer is one of the essential tools a plywood maker can have. The right tool makes all the difference, and we’ve got the experts here to tell you what’s good and what’s not so good when it comes to finding your perfect match. This blog post is going to walk you through the top features of an edge banding trimmer and how it can help you maintain your building’s exterior.

We are experts in this field and we enjoy helping people with their projects, so we made this blog for sharing what we know about the best edge banding trimmers and how to make a perfect edge banding.

What is Edge Banding Trimmer

Edge banding trimmer is a device that helps trim the edge of veneer edge banding. We know veneer edge banding is a thin sheet used to cover the plywood edges. It should be larger than the edge before attaching it to them, so after doing this, you need to do some edging too with a best edge banding trimmer. Edge trimming helps to create clean corners at 90-degree angles and ensures the boards fit together well as they go through types of machinery such as sanders, planers or jointers.

You can use other tools such as a chisel or even sandpaper for this, but they won’t give your work a nice-looking finish and also, they will also take more time than edging trimmer. Those ways of edge trimming require lots of experience too. One wrong push will ruin your project in minutes, So, my suggestion is to spend a few bucks to buy an edge banding trimmer that will give you service for a long time.

Types of Edge Banding Trimmer

There are two types of edge banding trimmers available at the market: one-sided and double side. There is also an additional tool for making a square cut to edges so they can be applied easily on pieces of furniture, etc.

One Side Trimmer

One side of an edge banding trimmer has only one blade, so it can trim the edge just half at a time. For this reason, you might need to repeat the process if both sides are needed, and that would take longer than double-edged models. However, single-edged ones have their benefits as well. Generally, one side of the edge banding is along the grain, and another side is across the grain. So, if you use a double-sided trimmer and your blades are not sharp enough, it might damage your edges. In that case, you’ll get more benefit with a single-sided trimmer because there’s less risk involved when using duller blades.

Double Side Trimmer

A double-sided trimmer trim both sides of an edge at once, making it faster than a single side one. If you are doing large projects where the time matters more to you, this will save half your working time!

Edge End Cutter

There’s another tool you need to get an excellent, smooth cut on the edges of your material: an The best option for cutting the edge of wood veneer is an Edge banding Cutter. You can use a fast cap plier or scissors, but they won’t produce as flawless results. These tools are designed specifically to do this job, and nothing else comes close in terms of quality and ease of use! When you’re working with large pieces, it will be much easier if you have one on hand.

List of the 6 Best Edge Banding Trimmer

Now, I’ll give you the rundown on my top 6 best edge banding trimmer for the best edge banding.

1. Quad Trimmer with Tungsten Carbide Blades

The Quad trimmer is the trimmer that cuts in all directions without having to change blades. No spring attached between two parts of this trimmer. The blade is made of alloy steel. You can change these blades whenever you want, but you can use one of these blades for 200 feet cutting. It also has a patented blade locking mechanism that allows you to trim with one hand and prevents the blade from jumping up or down while you are cutting. Won’t leave rust rings on your pool deck or patio – Carbide blades last five times longer than steel blades. 

The Quad Trimmer comes with a lifetime warranty. While the width of the plywood surface is larger than the trimmer, you can still use one-half of your tool to do each side. It comes apart so that it is usable as a single blade trimmer! 1/2” is the smallest it will work on as a double side trimmer. It will also work on laminate.

Pros

• This trimmer cuts in all directions.
• One blade can cut 200 feet of plywood.
• The blade locking mechanism prevents the blade from jumping up and down.
• Made of carbide blades that last 5 times longer than steel blades.
• It comes apart so that it can be used as a single blade trimmer.
• Comes with lifetime warranty.

Cons

• A little bit expensive.

2. Edge Supply Edge Banding Trimmer

Straight banding trimmer sometimes tears tear the veneer, especially with oak or birch wood species. You can alleviate some stress by easily cutting veneer edge banding with this professional tool. This trimmer features an ultra-sharp circular blade that makes it easy to cut off any excess material and achieve perfect results every time without tearing your workpiece! This veneer cutter is easy to use and suitable for professional or hobby woodworkers. It’s versatile, cut around tight circular radiuses and straight lines resulting in a clean, flush finish on your finished project. This trimmer is specially designed for rounded corners. It trims rounded corners with ease due to the circular blade and ergonomic design.

This edge banding cutter is perfect for edging up to 1 mm in thickness and between 0.5” – 2”. It can fit a variety of different sizes, which makes it an extremely versatile tool! The highest quality carbon steel is used to make this long-lasting veneer trimmer. The blade on the circular cutter can be rotated slightly when a fresh edge becomes necessary, and there’s no need for new blades for a long time!

This veneer edge trimmer will make your next project a breeze! With this versatile tool, you can tackle any woodworking task, from furniture to cabinetry, with ease. From wood veneer to melamine and PVC, our heavy-duty blade is up for the job!

Pros

• You will never have to change blades for many years because you can just slightly rotate the circular blade 1 mm to expose a new fresh blade.
• That will never tear the veneer.
• This trimmer is specially designed for rounded corners. It trims rounded corners with ease due to the circular blade and ergonomic design.
• This edge banding cutter is perfect for edging up to 1 mm in thickness and between 0.5” – 2”.
• Can work on wood veneer, melamine, and PVC.

Cons

• This is a small trimmer, so it is a little bit hard to hold and press.

3. Virutex Super Edge Banding Trimmer and Scraper

The Super Edge banding trimmer is a tool that will help you create beautiful and perfect edges on your veneer. The symmetrical shape of this tool makes it possible to work along the grain of the wood veneer so that you can get a perfect result every time. Equipped with long-lasting high-quality steel interchangeable blade, Super edge can cut up to 1.5 mm thick tapered edge on your veneer boards and plywood. It does not make any scratched to the project. This tool is equipped with a big handle for the most comfortable use. It can be used on both sides, left or right sides, making this tool very economical and handy when working with a wood veneer.

It comes equipped with a long-lasting, high-quality steel interchangeable blade that can be easily replaced when worn out (Sold separately). The blade has some float in it. It is important to align it correctly and tighten it in place before first use. It will be better if you use the sandpaper after using this trimmer.

Pros

• The symmetrical shape of this tool makes it possible to work along the grain of the wood veneer.
• Equipped with a long-lasting, high-quality steel interchangeable blade.
• It does not make any scratched to the project.
• This tool is equipped with a big handle for the most comfortable use.

Cons

• This product has a guide that supports only straight edges.

4. Quad Trimmer with Carbon Steel Blades

The Quad Trimmer is designed to trim boards up to 1.5″ wide. It can be used with both sides of the board at once or one side at a time. It features 30-degree carbon steel blades which allow it to trim in either direction depending on your needs and will provide you with a clean edge every time. There are no springs between the two parts of this trimmer, so nothing can fall out or get lost! 

The Quad Trimmer is lightweight and easy to use so that you can get the job. The design of the Quad Trimmer allows for fast and easy board preparation, leaving you more time to enjoy your projects. The blades are easy to replace when they get dulled or damaged. It has a comfortable grip handle, making it easy to hold and use for long periods without feeling discomfort on your hands or arms. This is an affordable device, and it comes with a lifetime warranty for your peace of mind.

Pros

• This Quad Trimmer is designed to trim boards up to 1.5″ wide.
• This trimmer allowed to cut in both directions.
• No spring between two parts.
• This is lightweight and easy to use.
• The blades are easy to replace when they get dulled or damaged.

Cons

• Sometimes, you need more than one run for a smoother edge.

5. Luomorgo Edge Banding Trimmer

The Edge Banding Trimmer is a perfect tool for any home or professional cutting, trimming, and shaping of veneer strips. It’s made of high-quality PVC material, so you won’t have to worry about it aging any time soon or falling apart on the job! The unit comes with one edge banding trimmer with 2 blade that features both the edge banding trimmer function as well as additional shearing capacity to produce crisp edges on material up to 3mm thick. It also includes an ergonomic handle edge trimmer with 2 blades which can be used for cutting the end of the birch supply. 

This edge banding trimmer is an excellent tool for creating perfect edges. It’s designed to handle materials with thicknesses from 0.01-0.12 inches and widths of less than 2 3/8″ (58mm). Handle Edge Trimmers are used on thinner material, such as sealing edging with dimensions between 0.02 – .6 mm in height or width. 

These Edge band trimmers are the perfect tool for trimming edge bands and other materials. They can be used on panel furniture, cabinet manufacturing, decoration projects, or any of your industrial needs! The non-slip surface can be easily operated and is durable. 

Pros

• This package Contains one edge banding trimmer with 2 blades and an ergonomic handle edge trimmer with 2 blades.
• Edge trimming and edge end cutting can be possible with this package.
• Body made with high-quality PVC materials.
• The edge banding trimmer is jointed with spring.
• This trimmer can be used as a single side trimmer.

Cons

• Sometimes handle gets slippery during work.

6. Mini Edge Banding Trimmer

The edge banding trimmer is made of high-quality PVC materials. It is a durable tool that creates professional-looking edges on your material. The non-slip top surface makes it easy to operate, while the two sets of blades provide users with different options for use depending on what they are working with. It comes with two sets of blades made of carbide steel. This Edge banding trimmers fit edge bands that measure 0.5mm or less in thickness as well as widths between 15-40mm.

This trimmer edge banding tool is the perfect accessory for those looking to trim their edging made of flexible melamine paper, veneer, plastic, and other materials. Edge band trimmer is a wide application, suitable for panel-type furniture, cabinet making, decoration, and other industries. It’s an essential edge-banding tool for woodworking! This holiday season, give the gift of a perfect finish to your friends or family with this Edge Band Trimmer that will make any project look cleanly finished in no time at all. The package included a cream dispenser, a cleaning brush, and three nozzles. You can replace it.

Pros

• Body of this trimmer made of high-quality PVC materials.
• The non-slip top surface makes it easy to operate.
• Provides one set of extra blades.
• This Edge banding trimmers fit edge bands that measure 0.5mm or less in thickness as well as widths between 15-40mm.
• Can trim flexible melamine paper, veneer, plastic.

Cons

• sometimes this trimmer gets jammed.

Buying Guide

Don’t let the edge banding trimmer selection process overwhelm you with all of its options. In this part, we’ll go over some critical features for different types so that when it comes time to buy an edge banding machine, you can find one that suits your needs!

Thickness 

Thickness can be a significant factor when looking for the right edge banding trimmer. You need to figure out how thick your project is before you buy one of these so that it will trim nicely. Generally, plywood comes with a width of 1/8 to ¾. So, all edge banding trimmers can cover the entire surface if your edging is smaller than this size. If you have edges larger than ¾” plywood, then a one-sided edge banding trimmer would work. However, if your project requires faster production or the size of your edging falls between these ranges (1/8″-¾”), consider double-banded trimming tools instead!

Know More: What Size Screw for 3/4 Plywood and What Type of Screw do I Need?

Double side or single side trimmer

Single-sided trimmers are perfect for projects that need one-sided trimming. If your project requires the maximum possible time to be trimmed on only one side, a single-sided trimmer is worth checking out!

If your project surface is much larger, then you should go for a single side trimmer. But if you go for the double-side trimmer, some of those can be used as a single-side trimmer, but they may be expensive and not much durable compared to a single-sided trimmer.

One more thing, if you are going to trim a carved area, then you must choose a single side trimmer for better results.

Your tools collection

If you don’t have an end trimmer in your toolbox, then the best thing to do is buy one that includes one. You can either buy it separately or get the product that has one. If your stuff doesn’t need much cutting and is small, use a utility cutter instead of this tool.

Multiple uses

You should always buy a product that can be used for multiple purposes. So, choose the one that adaptable to melamine paper, wood, plastic, and PVC if you need it for different purposes!

Budget

In the end, you have thought about your budget. Some of these products may be great for work but not in your price range. So choose one product that will fulfill all needs and is also within a reasonable cost!

Other Necessary Tools for Best Edge Banding

You will need some other necessary tools for banding the edge of your plywood. Some of these are:

A) Edge Banding Supply

Edge banding supply is a strip of wood veneer that can be applied to the plywood edge. We all know that plywood has layers made up of different types of woods glued together, so its appearance isn’t typically great to the edge. Edge banding supply covers up all those layers and protects your table from damage.

There are two types of edge banding: solid wood and iron on edge banding. Solid wood is time-consuming to install, while iron-on does not require any skill or expertise; it’s simply cheap! Therefore, in this article, we will only be discussing the process of applying an iron-on strip along a cut edge.

Iron-on edge banding has two types. There are PVC edge bandings and veneer edge banding. PVC materials make up the latter, which is a cheaper option that lasts longer than other products on the market but lacks aesthetics in some cases because it doesn’t match with plywood’s wooden design. Veneer options come from any type of wood, so everyone can have matching designs for their furniture or project while still saving money over solid material.

Veneer and PVC edge banding have two different forms: either it is pre-glued or adhesive. The pre-glued veneer comes with glue on one side, which needs to be activated by heat from a heating material like an edge banding iron. Adhesive materials simply need pressure applied for them to bond together securely.

This edge banding is not as strong as iron-on edge bandings. Most people use iron-on edging in their projects because it’s easy to apply. Still, this type of edge banding would be preferable for covering a curved surface – such as plywood edges that aren’t flat or straight because those areas are hard to iron on.

B) Wood Filler 

Wood filler is typically used to fill in the gaps between surfaces when they are too close. Sometimes, your plywood edge may not be smooth enough, and it contains some small cracks or holes near the edges. If you add a supply of birch wood above these areas, then this Wood filler is typically used to fill the gaps on wood surfaces. Sometimes plywood edges can contain small and large cracks, so always use a good cutting tool to cut them down first before applying edge banding. Fill up those with some high-quality filler if you plan to put edge banding on those cracks.

C) Scissor

When cutting edge banding from a large piece, you can use the scissor to cut it or hand. The strength of some types of edges will not be strong and may break with your fingers. To ensure that you have square edging, you should definitely use sharp scissors for this task instead as they are more precise than our hands. You could also substitute the scissor with fast cap pliers, which would turn out better results as well!

D) Edge Banding Iron

You need a high-quality edge banding iron to apply heat for the pre-glued edges. I previously mentioned that these glue surfaces become activated with just some heat and pressure applied, so you must have an effective tool if this is your process of choice.

E) Chisel

Sometimes, you can’t use the edge banding trimmer to those small corner areas. You may even be unable to insert it into such spaces as well. So, if this is a problem for your project and needs attention, try using chisels instead!

F) Roller

A roller is a tool that should be used to attach edge banding. First, you must activate the glue and then press the edge banding with a roller so there are no gaps between it and your material and the edge.

G) Sanding Block

At the end of the edge banding process, sanding is a very important step. You will not always need to use a sand block, but sometimes you may find areas that are uneven after using an edge trimmer and require smoothing with your own hands. You can use sanding to make those are smooth.

Know More: 10 Best Sanding Belt for Wood | Sanding Belt Grit Chart

Edge Banding Process

Edge banding is very easy to do. Now I will describe the whole process step by step.

Cutting Edge Banding

The edge banding supply comes in large pieces. You have to cut it into the required size yourself, but always leave about 1 inch of extra length on all sides when you do so. When choosing an edge banding material, choose slightly wider than your project’s edges are thick. Use a scissor for cutting the banding supply.

Iron-On Edge Banding

You have to apply a heat machine or an iron to activate the glue’s adhesive properties in this step. Glue is attached to one side of the edge banding, and make sure that once inserted, and its glued portion remains down on top of your material surface.

Now use iron for pushing down along the whole length for two minutes, which will melt the adhesive into place as well as seal any gaps between pieces.

Know More: 5 Best Iron for Edge Banding in 2023

Use a Roller

When the glue has been activated, press the edge banding with a roller along the edge. This pressure will attach the strip to your project, and you can let it dry out until fully set. Finally, use an edger machine to trim away any excess material from around your edges for that finished look!

Know More: 5 Best Edge Banding Machines: Buying Guide and Reviews

How to Trim the Edge of a Plywood

The process of trimming edge banding is given step by step.

1. You’ll need to cut the end of your birch lumber with a nice edge end cutter to start. Place it just like in this picture and then press down on that handle real good!

2. You can also use a utility knife if your plywood is small – make sure it is sitting flat on the table when you’re cutting off any extra pieces from these edges, though, so everything’s perfect for our project later!

3. You’ll want to keep a little space between your supply birch and the blade of your trimmer. Doing so will prevent ruining any projects you’re working on, so make sure there is at least half an inch gap between them when setting up this step-in order for it to go smoothly.

4. If you use a double-sided plywood trimmer, press the device from both sides and hold it tightly to your wood. Now push this towards the front of the board to cut through any excess birch on each side. If there is still some extra birch leftover, repeat step one after doing this, all unwanted parts have been trimmed away.

If you are using one side edge trimmer, then set your trimmer up that way. Then all you need to do is push it along as you make your cut – going from left to right with small strokes until all of those pesky corners are trimmed away! Then after finishing one side, repeat these steps over again on the other side.

After trimming both sides, you need to use a sanding block at those areas for a smoother edge.

Frequently Asked Question and Answers About Edge Banding Trimmer

1. Does it Work Well on Curves?

Not all the trimmer work well on the curved project, but some of these trimming machines are perfect for your needs. One-sided blades or circular blades are best used to get a smooth finish and avoid jagged edges at corners and curved areas.

Know More: Learn How to Flatten Warped Plywood | 9 Best ways

2. Is it Easy to Use?

With this device, your DIY projects will be a breeze. The process is simple: set the trimmer to the desired length and then push it against the edge of your project! You can have as many tries that you need for an even smoother finish- so don’t worry about any mistakes.

3. What Types of Blades are Available?

There are many blades available at the market, but the most commonly used is the carbide steel blade.

4. Do You Need to Sand Edge Banding?

You don’t always need the towel and sandpaper when it comes to edge banding, but not all edger trimmers are created equal. If yours leaves a visible unsmooth area of any kind – even when using coarse-grit paper or cloths – use your favorite tool for polishing the edge until those edges shine like how you want.

Conclusion

We hope this article has given you a better idea of what to look for in the best edge banding trimmer. If you have any other questions, feel free to leave them in the comments below, and we will get back to you as soon as possible!

Related Posts

1. How to Apply Edge Banding | Edge Banding Guide
2. How to Trim Edge Banding of a Plywood
3. 5 Best Edge Banding Machines: Buying Guide and Reviews
4. 5 Best Iron for Edge Banding in 2023
5. Can You Stain Edge Banding or Not?
6. Check How Can You Plane Plywood
7. Learn How to Flatten Warped Plywood | 9 Best ways
8. Learn How to Prevent Plywood From Warping | Tips and Tricks
9. 9 Best Tools For Cutting Plywood in 2023