Differences Between Porous Wood and Non Porous Wood

Share This Post:

You have to know about the differences between a porous wood and non porous wood before making wood project. Porous wood (Hardwood) is a type of wood that has pores on its surface. These pores allow the wood to absorb water more efficiently, and they also let oxygen get into the tree, which is important for growth.

Non-porous woods (Softwood) do not have these same traits, which means that they need to be sealed with a sealant before being used around moisture or outdoors. It’s easy to tell if you are dealing with porous or non-porous woods by examining their surfaces and looking at their edges. If it looks like there are tiny dots on the surface, then you know it’s porous, while if the edge appears clean, then you’re dealing with non-porous wood!

Porous Wood

Hardwood trees are known for their strong and durable wood that has a rough appearance. The tracheid content is less in hardwoods than other types of woods, making it good to use as structural support because the wood does not splinter easily; additionally, hardwoods can be used with compression (such as carpentry). It is a perfect wood for wooden hammer.

Know More: Types of Porous Wood

Non Porous Wood

Softwood is defined as the wood of trees that do not have true leaves. It’s more flexible, thin and elastic with a fine texture to it. Vessels are absent in this type of tree which means there is no xylem or phloem present inside them – only tracheid (the cells responsible for transporting water). Tracheid content is actually higher in softwoods when compared to hardwoods because they need less support from their thickness than hard woods do; 90-95% of all tracheid tissue found within any given piece will be made up by these types if trees’ tissues! Examples include Araucaria, Cedar, Cypress but also Yew among others

Difference Between Porous Wood and Non Porous Wood

differences between porous wood and non-porous wood tell you how to tell if the wood is porous or not. You’ll know it’s porous by looking at its surface, which has tiny dots on it as opposed to a clean edge. Non-porous wood doesn’t have pores on the surface and needs to be sealed before using indoors because of moisture sensitivity.

The differences are that one type of wood (Porous) can absorb water more easily while having enough air pockets for growth. Whereas non-porous does not absorb water well but must be sealed with sealant before use around moisture or outdoors due to lack of oxygen intake from pore spaces!

The “crispy” sound you get when breaking dry, brittle branches indicates if it’s likely to be porous or not. If you break open a branch and hear that crispy sound, its porosity made those sounds most likely!

Know More: Hardwood vs Softwood

Uses of Porous Wood and Non Porous Wood

Porous woods are used for a variety of purposes. Examples include furniture, housing insulation, and even clothing! Porous wood also called hardwood that can be used for harder work like using as a hammer. They can also be burned as fuel or in the manufacturing process to remove impurities from objects like metals. Non-porous woods need to be sealed before use because it’s more sensitive to moisture and they aren’t very durable, so non-porous woods’ primary usage is decorative such as trim on homes or boxes that hold electronics. Oak, birch, and cedar are all examples of porous wood.

Know More: Best Hardwood Mallet


The difference between porous wood and non-porous wood is largely a matter of preference. One type might be better for one task, while another may work best in other cases. You should always make the decision with your own needs in mind when considering which to use for any project. If you have any questions about this topic please don’t hesitate to contact us!

Related Posts

  1. Is Wood Porous or Non Porous? Common Questions About Wood are Answered
  2. Some of the Best Wood for Mallet
  3. The Best Wood for Porch swing | How to Make a Porch Swing
  4. The Best Chisel Mallet and Wooden Mallet in 2022
Share This Post: