In this article, we will compare dead blow hammer vs rubber mallet. We will highlight the In this article, we will compare a dead blow hammer and rubber mallet. The question on every DIYer’s mind is which one should I get? A lot of people don’t know the difference between these two tools or what they’re for at all! Let me tell you that both hammers are made out of hard plastic-like polyurethane, but there are many differences other than just material composition.
A dead blow hammer and rubber mallet are both made of some type of hard plastic. What exactly is the difference between a dead blow hammer and a regular rubber mallet? We’ll take you through it all in this article! You might even find that one tool suits your project more than another – we explain which ones to use for what later on down the page.
Dead Blow Hammer Overview
What is Dead Blow Hammer?
A dead blow hammer is a heavy tool that’s used to strike an object. It’s usually made from steel or plastic or even with a suitable hardwood. Its weight and the fact that dead blow hammers have less rebound make them ideal for working on hard surfaces, such as floors.
Inside of a Dead Blow Hammer
Dead blow hammers are made with a large head that is filled with small weights. When you hit the hammer into any surface, these weights help to conserve all of its kinetic force and distribute them evenly on contact, so it doesn’t require much effort from you next time around either. The weight also ensures that it won’t bounce back for more precision control over where your blows land.
About Dead Blow Hammer
Unlike hammers in general, which can sometimes leave visible hammer marks on metal objects because they don’t transfer energy smoothly enough, dead blow hammers will produce minimal marring of any kind. The dead blow hammer’s weight is distributed evenly across the head and end, which prevents it from causing any damage.
Dead Blow Hammers are also known as dead-blows. These days, they’re used for different purposes, such as assembling delicate pieces together without damaging them. In other words, if you want to work on hard surfaces like floors, then a dead blow hammer will be your ideal tool because its rebound is lower than that of regular hammers due to their weight distribution. This means less risk of marring metal objects with visible marks after being struck at least once with a dead beat.
Advantage of Using Dead Blow Hammer
- It has more weight that makes it capable of doing hard work.
- It doesn’t bounce back.
- Distributes the kinetic force evenly on contact.
- It will not damage the surface.
- You’ll get more control over this hammer.
The disadvantage of Using Dead Blow Hammer
- It will break the soft surface like glass and fiber.
- Need higher force when striking.
Rubber Mallet Overview
What is Rubber Mallet?
Unlike dead blow hammers, rubber mallets are usually made from wood or hard plastic. They’re not quite as heavy, and they have a little more rebound than dead blows do. Rubber mallets are suitable for working on softer surfaces because of their increased ability to absorb energy when striking. Rubber mallets would be used in situations where you want less chance of destroying your item (especially if it has some kind of special coating). A rubber mallet is also great for tapping things like chisels into place or driving rusty screws out of boards.
Head of a Rubber Mallet
The rubber mallet head is made of rubber only, so it’s much lighter than any other hammer. For being lightweight, this tool bounces a lot when striking things; but that soft-rubber material also ensures the contact surface doesn’t get damage from your strike.
Advantage of Using Rubber Mallet
- Lighter than any other hammer.
- Faster working speed.
- Easy to strike.
- Doesn’t cause any damage to the surface.
- Doesn’t get rusty.
- Require zero maintenance.
The disadvantage of Using Rubber Mallet
- Too much bouncy.
- Doesn’t provide total control over the strike.
- Doesn’t hit with lots of force.
Dead Blow Hammer vs Rubber Mallet
- Dead Hammers typically weigh around 18 ounces (500 g) with a flat rectangular face on one side and other shaped faces on opposite sides, depending on the task the hammer is designed for. Rubber mallet has a larger, heavy head on one end of an elongated handle and rubber face on the other end. They are used to deliver force in more controlled manners than rubber mallet.
- The main difference between these two hammer is that dead blow has no bounce back from striking something hard, whereas, with rubber mallets, you might end up hitting yourself if you’re not careful because they do cause some rebounds on impact. Another big difference would be how often someone may use either item; since dead blow hammers can cover both delicate and heavier tasks than rubber mallets, this tool could potentially get used twice as much.
- Rubber mallet are mainly used for light-duty jobs like household repairs as well as carpentry or furniture assembly. – A dead blow is a type of hammer with a much larger head on one end that might have been derived from the use of heavier mallets instead because it doesn’t transfer any vibration when striking objects like hammers do.
- a perfect Dead blow hammers can also substitute steel hammers due to their softer faces without being affected by space constraints, rubber mallets work effectively in tight spaces because of their shorter handles. Plus, they’re also easier to control and are designed with a flared end that can be used for centering or straightening nails and driving them in at an angle.
- Mallets are made from wood or plastic. On the other hand, dead blow hammers come with different types of materials like rubber, wood, steel, aluminum zinc alloy, among others. But both hammer can be used as a chisel mallet.
- A lot of mallet users prefer this tool due to its versatility, but not everyone enjoys using it. It’s a very personal preference as for dead blow hammers, some like them because of how the weight is distributed, and others don’t prefer it because they find that it takes too much time to get up after every swing due to its design which can make this tool cumbersome for certain jobs.
- Some of the similarities between dead blow hammers and mallets are that they both have a ball shape on one end, which makes it easy to grip, and also allows for maximum striking power when hitting something hard. Another similarity would be how long these tools are; they’re typically either 18 inches or 24 inches in length – so there’s not too much difference in size from one another.
List of Rubber Mallet Uses
- Carpet pounding
- Glass work
- Smaller project
- Building demolition
- Shaping metal
- Fitting wooden parts
- Plasterboard
- As a weapon in martial arts such as Karate and Taekwondo
List of Dead Blow Hammer Uses
There are so many uses of dead blow hammer. Here is a list of some of them.
- Chassis work.
- Installing hardwood floors or other natural materials.
- large projects.
- More precision in hitting something.
- Driving stiff wooden joints together.
- Dislodging stuck parts.
- Pop small dents out of sheet metal.
- In auto repair.
- Hubcap installation and removal.
Conclusion
If you’re looking for a new dead blow hammer or a rubber mallet, then we hope this blog post has been useful to compare the features of a dead blow hammer vs rubber mallet. If you have any questions, please feel free to ask. We would love to hear from you. Have a wonderful day!
